Oki C9800hdn Configuration Manual

Also see for C9800 Series: Specifications User guide Manual Safety and regulatory information Regulatory and safety information

Contents

Oki C9800hdn Configuration Manual Manual pdf 42 page image

22-18 Setting up Network ServersThe remote printer name is also used when setting up a Windows NT 4.0/2000/XP/Server 2003 workstation or Windows NT 4.0/2000/Server 2003 server to connect tothe Fiery over TCP/IP. Enter the remote printer name when you set up yourWindows NT 4.0/2000/Server 2003 printer, as the “Name of printer or print queueon that (lpd host) server” in the Add LPR Compatible Printer dialog box.For the Windows 2000/XP printer driver, enter the remote printer name for QueueName under LPR Settings in the Configure Standard TCP/IP Port Monitordialog box.Setting up the Fiery on TCP/IP networksEvery machine (host) on a TCP/IP network, including the Fiery, must have a unique32-bit internet address (IP address). Contact your network administrator to obtain anaddress for the Fiery. Workstations on a TCP/IP network can print directly to theFiery as a remote printer, or can print to a Windows NT 4.0/2000/Server 2003 serveror UNIX workstation acting as a print server. Since the Fiery spools jobs and acts as aprint server, there is no advantage in placing another print server between aworkstation and the Fiery. If you choose to do so, however, there is no difference insetup except that a client machine does not have its own spooling area.TO SET UP F IERY PRINTING ON UNIX SYSTEMS1. Specify the appropriate settings in Fiery Network Setup.Enter a valid IP address, subnet mask, and gateway address for the Fiery.2. Specify the appropriate settings in Fiery Printer Setup.Publish the Print queue, Hold queue, and/or Direct queue.TO SET UP TCP/IP FOR COMMUNICATION WITH THE F IERY1. A superuser (with root login) must add the Fiery to the network’s IP host table orother system database of network printers.2. In the file or utility used by your network, specify the remote printer name, the printserver protocol, the queue, and the spool file for the Fiery name you assigned.3. Make the Fiery available as a printer to other network users.