Oki C9800hdn Software Installation Manual

Also see for C9800hdn: Safety and regulatory information Regulatory and safety information Installation instructions Limited warranty Limited warranty

Contents

11-37 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003Each connection (Hold, Print, or Direct) requires a new printer driver and printerdescription file. To set up printing to a second or third print connection, repeat theprocedure, “To set up SMB printing on Windows 2000/XP/Server 2003”. If youinstall more than one printer, give each a descriptive name during printer driverinstallation, such as Aero-Print or Aero-Hold, so you can easily identify printers.B EFORE YOU BEGIN• Configure the Fiery for SMB printing in Network Setup > Service Setup > Windows Setup.SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,and on the Configuration page. For more information, see Chapter 2 of theConfiguration Guide.TO SET UP SMB PRINTING ON W INDOWS2000/XP/S ERVER 20031. Open My Network Places.2. Browse for the printer you want to print to.The printer name you are browsing for is the name entered in Network Setup >Service Setup > Windows Setup > Server Name. For this information, see theConfiguration page.The amount of network traffic determines the amount of time required for theBrowse function.N OTE : You can also locate the printer using the Search feature on your Windowscomputer. Right-click My Network Places and click Search for Computers. Type thename of the printer and click Search Now.If you are not able to locate your Fiery, contact your network administrator.3. Double-click the name of the Fiery to display enabled print connections.4. Double-click the print connection you want to print to.The printer files are downloaded from the Fiery and the print connection is set up.For more information, see “To install the PostScript or PCL printer driver forWindows 2000/XP/Server 2003” on page 1-27.