11-56 Installing User Software on a Windows ComputerInstalling the ICC profiles on a Windows computerThe ICC profiles included in the Icm folder on CD2 are for use with ColorWise ProTools. You can also use the ICC profiles with applications that support ICC standards,such as Photoshop. For most ICC-aware applications, the files must be installed in afolder named Color in the System folder. For use with ColorWise Pro Tools, you cancopy the files to a folder of your choice.You can upload additional ICC profiles with the Profile Manager in ColorWiseProTools. For more information on uploading and using ICC profiles with ColorWisePro Tools, see Chapter 1 of the Color Guide.TO INSTALL THE ICC PROFILES ON A W INDOWS COMPUTER1. On CD2, open the ICC folder.To access this folder click Start>Run, and enter D:\ICC (where D: is the drive letter ofyour CD drive). If the Installer autoruns when you load the CD, click Exit to close it.2. If you are using Windows 98/Me, copy the profiles to the Windows\System\Colorfolder on your hard disk.If you are using Windows NT or Windows 2000, copy the profiles to theWinnt\System32\Color folder on your hard disk.N OTE : If a folder named “Color” does not exist in the System32 folder, create one andinstall the profiles into it.If you are using Windows XP/Server 2003, right-click the profile you want and clickInstall Profile.N OTE : The profiles are installed automatically to the Windows\System32\spool\drivers\color folder on your hard disk.Loading the monitor settings fileThe Efirgb.icm monitor settings file can be used in Photoshop, or other applicationsthat support ICC profiles, to define a source color space for printing to the C9800.These instructions assume you have installed the ICC profiles included on CD2. Formore information, see the preceding section.