ES 2024/2024e Setting up • 55System Configuration MenuThe default settings are bold.Item Value DescriptionPOWER SAVEDELAY TIME5 min; 15 min; 30 min;60 min; 240 min.Sets the time before printer enterspower save mode.PERSONALITY Auto emulation;PCL; IBM PPR III XL;Epson FX; AdobePostScriptSelects the printer emulationlanguage. Note: the only printerlanguages that can be selected arethose enabled in the Personalitysection of the Maintenancemenu.USBPS-PROTOCOLASCIIRAWSpecifies PostScript (PS)communication protocol mode ofdata from USB. (In RAW mode,Ctrl-T is invalid.)NETWORKPS PROTOCOLASCIIRAWDisplayed this Item when OkiLAN7300e is installed.Specifies PS communicationprotocol mode of data from OkiLAN7300e .(In RAW mode, Ctrl-T is invalid.)CLEARABLEWARNINGOn; Job PCL emulation: Sets the time beforedeleting error messages. If On,press Error Delete switch to displayerror. If Job, error remains displayeduntil next print job is received.PS emulation: Error messages areonly shown during job regardless ofsetting.AUTOCONTINUEOn; Off Sets the printer to automaticallyrecover after a memory overflow orprint overrun.MANUALTIMEOUT60 sec; 30 sec; Off This parameter sets the period oftime, that after requesting paper tobe inserted and is not inserted,when the print job is cancelled.Only works in PostScript mode.WAIT TIMEOUT Off; 5 sec to 300 sec;default = 40 secSets the time between receiving thelast byte of data and the page beingautomatically ejected.Only works in PCL mode.In PS mode the job will becancelled.
