Oki ES7411 Network Manual

Also see for ES6410: How to remove Jammed Paper User guide User guide

Microsoft windows > 34Using TCP/IP protocolWhen using lpr in UNIX and other TCP/IP environments, please select Yes. To use ina TCP/IP environment, an IP address should be assigned to the Ethernet card.If Yes has been selected and TCP/IP is the only working protocol and the IP addresshas not already been assigned, you can either obtain an IP address automatically orassign an IP address.When Obtain an IP address automatically is selected, the device IP address willbe automatically assigned by the DHCP server. In an environment without a DHCPserver, please assign the IP address manually.If you are manually assigning an IP address, you need to enter:> An IP address> Subnet mask> Gateway address10. Click Next.Using Bonjour protocolBonjour is the preferred protocol for printing data from the Macintosh environment.Using NetBEUI protocolUsing NetBEUI makes it easy to manage your Oki product and print within thenetwork environment of Windows.11. When the settings are correct, click Execute. The new settings are transmitted tothe network card but it still operates with pre-transmission settings.12. Click Finish to validate the new settings.13. Switch the printer off for 15 seconds and on again.Now that both Windows and the printer have been configured to use TCP/IP, the next stepis to configure Windows to print to the network printer.NETBEUI PROTOCOLNETWORK PRINTER SETTINGSThere are two configurable items under NetBEUI within the printer. These can beconfigured using the standard set-up utility described in “Device setup” on page 12.Although there are some differences in configuration options between the various Windowsplatforms, the procedure for printing using NetBEUI is the same.Please ensure the NetBEUI protocol has been installed in Windows. This can be confirmedby checking the network settings. If NetBEUI has not been installed please refer to thesection below.The relevant Windows installation CD-ROM may be required and you should follow the on-screen dialogue box prompts.COMPUTER NAME NAME ASSIGNED TO THE PRINTERWorkgroup PrintServeraa. Although the workgroup name can be changed, it is recommendedthat it remains as PrintServer.Comment User definable description