Oki ES7411 Network Manual

Also see for ES6410: How to remove Jammed Paper User guide User guide

Mac OS X > 47USB connectionIf you have not already done so, run the Oki software installer before following the stepsbelow.1. Start the Printer Setup Utility.This is located in the Applications > Utilities folder.2. Click Add Printer....3. From the pop-up menu, choose USB.4. Choose a printer to connect to.5. Click Add.6. Click the Printer Setup Utility menu, and choose Quit Printer Setup Utility.CONFIGURING PRINTER HARDWARE OPTIONSIf you have added additional hardware, for example additional paper trays, to your printerthese must be enabled in the printer driver.1. Start the Printer Setup Utility.This is located in the Applications > Utilities folder.2. Ensure that your printer model is selected.3. Click the Printers menu, and choose Show Info.4. From the popup menu, select Installable Options.5. Select any options appropriate to your hardware, and click Apply Changes.PRINTING THE CONFIGURATION PAGEThe printer’s configuration page reports information that is required for Mac OS Xconfiguration. Refer to “Configuration settings” on page 7 for details on how to print aconfiguration page.The first six characters of the Ethernet address are the same for all network cards. The lastsix characters of the Ethernet address are unique to each card.NOTEIf your printer is already listed, your Mac may already have discovered theprinter before you installed the Oki software. In this case, the printer may beusing the incorrect PPD file or may not have the correct hardware optionsconfigured. You should delete the printer, quit Printer Setup Utility, and re-launch the utility before continuing.NOTEApplies to IP and Rendezvous network connections only.NOTENot all utilities are supported by every operating system. Please check withyour support website for latest information.