Oki ES9170 Quick Start Manual

Also see for ES9160 MFP: Manual Safety information Operator's manual Fax guide Management guide

Contents

Oki ES9170 Quick Start Manual Manual pdf 75 page image

6Specifications of EquipmentThis section describes the types of acceptable paper, sheet capacity of each feeder and the specifications of the equipment.Specifications of Equipment73Acceptable paperFeeder Media type Weight Maximum sheet capacity Paper sizeDrawersPLAIN 64 - 80 g/m217 - 20 lb. Bond600 sheets (64 g/m 2 , 17 lb. Bond)550 sheets (80 g/m2 , 20 lb. Bond)A/B format:A3, A4, A4-R, A5-R, B4, B5, B5-R,FOLIOLT format:LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5" SQK format:8K, 16K, 16K-RTHICK1 81 - 105 g/m221 - 28 lb. Bond 450 sheetsLarge CapacityFeeder (optional)PLAIN 64 - 80 g/m217 - 20 lb. Bond2360 sheets (64 g/m 2 , 17 lb. Bond)2000 sheets (80 g/m2 , 20 lb. Bond)A4, LTTHICK1 81 - 105 g/m221 - 28 lb. Bond 1660 sheetsBypass trayTHIN *1, *2 52 - 63 g/m214 - 17 lb. Bond 1 sheetA/B format:A3, A4, A4-R, A5-R, A6-R, B4,B5, B5-R, FOLIOLT format:LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5" SQK format:8K, 16K, 16K-RNon-Standard size:Length: 100 - 297 mm (3.9 -11.7"),Width: 148 - 432 mm (5.8 - 17")PLAIN *3 64 - 80 g/m217 - 20 lb. Bond100 sheets (64 g/m 2 , 17 lb. Bond)100 sheets (80 g/m2 , 20 lb. Bond)THICK1 81 - 105 g/m221 - 28 lb. Bond 80 sheetsTHICK2 *1, *4 106 - 163 g/m229 lb. Bond - 90 lb. Index 40 sheetsTHICK3 *1 164 - 209 g/m291 - 110 lb. Index 30 sheetsTRANSPARENCY *1 — 1 sheet A4, LTENVELOPE *1, *5 — 1 sheetDL: 110 mm x 220 mm (4.33" x8.66")COM10: 105 mm x 241 mm(4.13" x 9.49")Monarch: 98 mm x 190 mm(3.86" x 7.48")CHO-3: 120 mm x 235 mm(4.72" x 9.25")YOU-4: 105 mm x 235 mm(4.13" x 9.25")TAB PAPER *1 — — A4, LT*1 Automatic duplex copying is not available.*2 When the Saddle Stitch Finisher (MJ-1106) is installed, the paper exits on the upper tray.*3 For printing on the tracing paper, select “PLAIN” as the media type. Automatic duplex copying is not available.*4 For printing on the sticker labels, select “THICK2” as the media type. Place the sheets one by one on the bypass tray.*5 Printing on the back side of an envelope is not possible.