Oki LED Printer User Manual
                                              | |
Contents
| 
E-37Symptom: Strange symbols appear during normalprinting.Problem: Wrong symbol set.Solution: Make sure the symbol set selectedcorresponds to symbol set resident, in font card, or insoft font.Hardware ProblemsSymptom: Graphic image prints partly on one page,partly on the next.Problem: Insufficient printer memory for this image atthis resolution.Solution: Change the resolution, reduce the image size,or install more memory in your printer.Symptom: Nothing happens, but printer indicates it isready to receive data.Problem: Configuration error.Solution: Check cable connection; if serial, make sureappropriate MODE command has been used (PC). Ifmore than one printer is available, make sure yourprinter has been selected. Make sure your printer ison-line.Symptom: “Garbage” prints.Problem: Incorrect cable configuration. (Also, see“Software Problems.”)Solution: Check cable configuration, continuity, andlength.Symptom: Printer freezes or displays error messagewhen computer is rebooted.Problem: Booting the computer while the printer is oncan cause a communications error.Solution: Take printer off-line before rebootingcomputer.Problem: Gases are given off by forms or adhesivespassing through the hot fusing unit.Solution: Make sure the forms you use can withstandheating, and provide adequate ventilation. |
Related manuals for Oki LED Printer
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine