C7100/C7300/C7500 Setting up • 49Color MenuThe default settings are bold.Item Value DescriptionAUTO DENSITYMODEAuto; Manual Select whether density adjustmentand Toner Response Curve (TRC)compensation is automatic.Auto: Density adjustment isautomatically run under specifiedconditions, and reflected in the TRCcompensation.Manual: Density adjustment is donemanually (see page 71).ADJUST DENSITY Execute If EXECUTE is selected, the printerwill immediately adjust density andreflect it in the TRC compensation.Density adjustment must beexecuted when the printer is idle. Itmay become invalid if executed inany other state.COLOR TUNING Print pattern Prints the pattern for the user tomanually adjust TRC. Ordinarily thisfunction is not needed because TRCis automatically adjusted. Thisfunction permits TRC adjustment toyour requirement by using theadjustment menu of HIGHLIGHT,MID-TONE, and DARK for each ofCMYK. See page 71.CYAN, MAGENTA,YELLOW ORBLACKHIGHLIGHT0+1+2+3-3-2-1 Adjusts HIGHLIGHT (light area) ofCyan, Magenta, Yellow or BlackTRC.Plus indicates adjustment toward adarker level and minus towardlighter.CYAN, MAGENTA,YELLOW ORBLACK MID-TONE0+1+2+3-3-2-1 Adjusts MID-TONE of Cyan,Magenta, Yellow or BlackTRC.Plus indicates adjustment toward adarker level and minus towardlighter.CYAN, MAGENTA,YELLOW ORBLACK DARK0+1+2+3-3-2-1 Adjusts DARK of Cyan, Magenta,Yellow or Black TRC.Plus indicates adjustment toward adarker level and minus towardlighter.
