Oki MB472w Maintenance Manual

Also see for MB472w: Safety and Warranty Guide Maintenance manual

Contents

Oki MB472w Maintenance Manual Manual pdf 100 page image

Oki Data CONFIDENTIAL 3. MAINTENANCE MENUS45762101TH Rev.1 3-103.3 Maintenance Utility3.3.1 Maintenance UtilityThe adjustments described in table 3-1 should be made by using Maintenance Utility.The following details the utility:(1) Maintenance Utility Operating Manuals:42678821FU01 Rev.1 (Version 1.0.0) or higher(Japanese)42678821FU02 Rev.1 (Version 1.0.0) or higher (English)(2) Maintenance Utility program:Applicable operating system File name Part numberWindows XP / Vista / 7 / 8 42678821FW01.zip 42678821FW01 Rev.1 (Version 2.0.0) orhigherTable 3-1: Adjustment options in Maintenance UtilityOption AdjustmentSection inMaintenanceUtilityOperatingManualOperation fromoperator panel(section in thismaintenancemanual)1 BoardreplacementCopies information in the EEPROM in the PU block,and the settings in the EEPROM in the CU block.Purpose: To copy the above data onto a CU/PUboard with which to replace the CU/PU board for amaintenance purpose.3.1.1 Unavailable2 SerialnumbersettingRewrites the serial number recorded in the PUblock and selects and rewrites the printer serialnumber recorded in the CU block and rewrites theoutput mode recorded in it.Purpose: To configure a maintenance replacementCU/PU board onto which the CU/PU boardinformation cannot be copied with the boardreplacement function (e.g. due to an interface error).3.2.1 UnavailableOption AdjustmentSection inMaintenanceUtilityOperatingManualOperation fromoperator panel(section in thismaintenancemanual)3 Factory/ShippingmodeSwitches between the Factory and Shipping modes.Purpose: To configure a maintenance replacementCU/PU board onto which the CU/PU boardinformation cannot be copied with the boardreplacement function (e.g. due to an interfaceerror). The maintenance board is put to theFactory mode usually by default and, by using thisfunction, must be set to the Shipping mode.3.2.3 3.4.2.84 MACaddresssettingSets the MAC address. 3.2.2 Unavailable5 Send to file Send the specify file. 3.1.2 Unavailable6 PasswordinitializationInitializes a Password. 3.2.57 Network logstorageStores a network log file. 3.3.1 Unavailable8 PU logstorageStores a PU log file 3.3.2 Unavailable9 PUmaintenancelog storageSaves a PU maintenance log file. 3.3.3 Unavailable10 Test print Executes the local print function and sends aspecified file.Purpose: To check the printer for operation itperforms solely and send a download file.3.4 Perform localprinting (referto SystemSpecification).11 CU logstorageSaves a local print data. 3.3.4 UnavailableNote! Do not operate or set options added with ‘Never use this option,’ or amalfunction is potentially caused.Before starting the maintenance, please disable MPS mode setting when theunit activate MPS mode as Enable. The condition of MPS mode is displayedon the header of Configuration pages as "MPS : OFF/ON".