Configuring your machine... > 30NETWORK SET UPThe MFP has to be set up properly on your network to perform scan to e-mail and otherfunctions. In order for other network devices to find the MFP on the network, the followingnetwork parameters have to be set:IP Address Set:IP Address: . . .Subnet mask:. . .Gateway IP:. . .DNS server:. . .SMTP server:. . .SMTP port:25POP3 server: . . .POP3 Port:110Explanation:1. IP Address Set:Choose Auto to obtain IP/subnet/gateway addresses automatically from DHCPserver. After changing setting from Manual to Auto, the MFP will automatically rebootthe network card.2. IP Address:This is the Internet Protocol (IP) address assigned to your machine by your networkadministrator.3. Subnet Mask:This is the net mask address assigned by your network administrator.4. Gateway IP:This is the gateway IP address assigned by your network administrator.5. SMTP Server:This is the IP address of your SMTP Mail Server assigned by your networkadministrator.6. SMTP Port:The port number of your SMTP Mail Server.NOTEAn IP (Internet Protocol) address uniquely identifies a host connection to anIP network. The System administrator or network designer assigns the IPaddress. The IP address consists of two parts, one identifying the network andthe one identifying your node. The IP address is usually written as fournumbers separated by periods. Each number can be zero to 255. For example,10.1.30.186 could be an IP address.NOTESMTP (Simple Mail Transfer Protocol) is the main communication protocol usedto send and receive e-mail on the Internet.Downloaded From ManualsPrinter.com Manuals
