Oki MC352 Startup Manual

Also see for ES3452 MFP: User guide Startup guide User guide

Contents

Oki MC352 Startup Manual Manual pdf 28 page image

- 28 -Initial Setup for Faxing3 Faxing (For MB362, MB562, ES5462 MFP only)Connecting to an ADSL EnvironmentNote● Do not connect with USB cable or LAN cable at this point.First, check that the machine is turned off. Ifthe machine is turned on, hold down the powerswitch for approximately one second to turn offthe power.Plug the [Telephone cable] connected to theADSL modem into the [LINE connection] ofyour machine.Remove the telephone connector cover.Plug the external telephone’s cable into the [TELconnection] of your machine.LINE connectionTelephone cablePublic Line(Analog)TEL connectionSplitterADSL modemMemo● Check the dial tone detection if it is unable to dial. Refer tothe Configuration Guide > “Appendix A - menu system” >“Admin Setup” > “User Install”.● If you cannot send or receive faxes very well, set [SuperG3] to [OFF]. Refer to “Step 3-5 Setting for Super G3”P.35 in detail.Connecting to an IP TelephoneNote● Do not connect with USB cable or LAN cable at this point.First, check that the machine is turned off. Ifthe machine is turned on, hold down the powerswitch for approximately one second to turn offthe power.Plug the [Telephone cable] connected to theIP telephone into the [LINE connection] ofyour machine.Remove the telephone connector cover.Plug the external telephone’s cable into the[TEL connection] of your machine.LINE connectionTelephone cableTEL connectionOptical IP telephoneCorrespondingtelephoneLANcable Optical cableOptical NetworkUnit (ONU)*Insert into thetelephone cable jack.Memo● Check the dial tone detection if it is unable to dial. Refer tothe Configuration Guide > “Appendix A - menu system” >“Admin Setup” > “User Install”.● If you cannot send or receive faxes very well, set [SuperG3] to [OFF]. Refer to “Step 3-5 Setting for Super G3”P.35 in detail.