Getting started > 165. Switch the unit on and turn the mirror carriage mode off:(a) Press the Setup button on the control panel.(b) Touch the Admin Setup button and enter the admin password (the default isaaaaaa). Refer to ìPre-configuration Informationî on page 25.(c) Touch the User Install button.(d) Using the right hand arrow button, navigate to Mirror Carriage mode. Touchthe Mirror Carriage mode button and follow the on-screen instructions tounlock.Power Save ModeIf you do not use the unit for a while, the machine will enter the power save mode to controlthe power consumption of the device. To cancel or initiate the power save mode, press thePower Save button on the control panel.Switching Off1. Press the Setup button on the control panel.2. Press the ShutDown button.3. Press Yes to continue.4. At the prompt, turn the power switch OFF.CAUTION!Do not turn off the power switch suddenly as this may damage yourunit. Always follow the correct procedure to ensure that no HDDdata is lost.
