Access Control > 70Access ControlIf your Administrator has enabled access control on your machine, it will automatically startup in access control mode. You will not be able to use it until you have provided valid logininformation. If the access control setting is:ï PIN; you will need to provide a valid PIN (personal identification number).ï User/Password; you will need to provide a valid user ID and password.After using it, you will be expected to log out, leaving the scanner unit in access controlmode, unable to be used by unauthorized users.Logging In1. If the PIN screen is displayed on the touch screen, press the PIN No. field anduse the numeric keys to enter your PIN, then press Enter. Press the Log in button.2. If the User/Password screen is displayed on the touch screen, press the UserName field and use the on-screen keyboard to enter your user name. Press Enterto confirm. Press the Password field and use the on-screen keyboard to enter yourpassword. Press Enter to confirm. Press the Log in button to continue.3. The machine is now available to use.Logging OutWhen you have finished using the machine, select Others > Logout to return to the accesscontrol screen.NOTEIf you logged in using the Admin ID (default is 000000), you will also need toenter the Admin Password. Using the on-screen keyboard, enter the passwordand press Enter to confirm.
