Oki MICROLINE 520 User Manual

Also see for Microline 520: User guide Product update Guía del usuario Manual do utilizador Service handbook

Contents

Oki MICROLINE 520 User Manual Manual pdf 30 page image

Using Your Printer E-23Selecting Character Pitch4 If the SI command is received from your software, thecharacter pitch selected on the control panel will beoverridden by the SI command.CHARACTER PITCH10 12 1520 PROP17RESETCharacter pitch determines the width of the individualcharacters and is measured in characters per inch (cpi).Press the CHARACTER PITCH button successively topage through the possible selections.Epson and IBM emulations — 10 cpi, 12 cpi, 15 cpi,17 cpi, 20 cpi, or Proportional. The lights indicatewhich pitch is selected.Okidata Microline Standard emulation — 10, 12, 15,17, or 20 cpi, either non-proportional or proportional:proportional is selected when both the light under thedesired cpi and the light under PROP are lit.To reset the character pitch to the factory default (10 cpi),make sure the printer is deselected (SEL light out), thenhold the SHIFT button while pressing CHARACTERPITCH button.Available FontsTypeface SpacingNLQ Courier 10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi,ProportionalNLQ Letter Gothic 10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi,ProportionalUtility (Gothic) 10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi,ProportionalHigh Speed Draft 10 cpi*, 12 cpi, 15 cpi, 17 cpi, 20 cpi(Gothic)Bar Code** Code 39, UPC A, UPC E, EAN 8, EAN 13,Interleaved 2 of 5, Code 128, Postnet* cpi = characters per inch** Bar codes are available only through appropriate softwarepackages or through programming.