ML1120/ML1190 User’s Guide – Paper handling > 363. Check the position of the tear-off perforations (1) relativeto the paper cutter (2).(a) To advance the forms, continue to hold down theTEAR button and then the SEL button.(b) To retract the forms, continue to hold down theTEAR button and the LF/FF button.4. Release the buttons after the tear-off perforations havebeen aligned with the paper cutter.REMOVING CONTINUOUS FORMS1. Tear off the continuous forms. See “Tearing off continuousforms” on page 35.2. Press the SEL button to set the printer off-line andreposition the continuous forms in the printer.3. Press the LOAD/EJECT button to move the front edge ofthe continuous forms backwards to the Pin Tractors.12NOTEIf a movement greater than +- 0.366 mm (1/144 in) isspecified, the above adjustment cannot be made.NOTEIf sprocket holes of the last page of the forms disengage fromthe sprocket pins, do not attempt to eject the paper to avoidthe possibility of a paper jam.