Oki ML1120 User Manual

ML1120/ML1190 User’s Guide – Troubleshooting > 62RESPONDING TO ALARM CONDITIONSUse the following table for guidance on how to respond toindicated alarm conditions.RESPONDING TO GENERAL PROBLEMSUse the following table to help you to identify symptoms withpossible causes and take suggested remedial actions.INDICATOR ALARM MEANINGS AND ACTIONSSEL ALARMOFF ON Paper has run out. Add paper and press the SELbutton.OFF Flashing The Paper Type lever is wrongly set for the type ofpaper in use. Press the SEL button and set thePaper Type lever to the correct position.OFF Flashing Problem with cut sheet feeding. Remove the cutsheet.Flashing ON Print data is received but printing does not startbecause no paper is being fed. Insert paper.Flashing OFF Printing cannot be resumed at this stage. Turn thepower OFF, verify that the carriage moves properly,then turn the power ON again.If the problem is still there after you turn thepower ON again, contact your dealer.PROBLEM CAUSE ACTIONNo powerNo power The power cable is notproperly connected.Check the power cableis properly connected atboth power outlet andprinter.Power outlet problem orpower outage.Plug another applianceinto this outlet to checkif it works.