Oki ML1120 User Manual

ML1120/ML1190 User’s Guide – Operating instructions > 45SETTING MENU VALUESThe following information explains the printer settings and howyou can change them. Printer items and their values are printedfor reference.C ONFIRMING CURRENT SETTINGSTo print the current menu settings, use a cut sheet of A4 paperor continuous forms of width at least 254 mm. In this example,a sheet of A4 paper is used.1. Set the Paper Type lever to cut sheet mode.2. To activate menu mode:(a) Ensure that the printer is powered OFF.(b) While holding down the SEL button set the printerPower Switch to ON.3. Place the cut sheet on the Paper Tray. The printer printsthe firmware details.4. Press the TEAR button to print out the current menusettings.TEAR+SEL On-line and off-line Microfeed down (0.366 mm(1/144 in) step at tear-offposition only.TEAR+LF/FF On-line and off-line Microfeed up 0.366 mm (1/144 in) step at tear-offposition only.SEL+TEAR On-line Quieter print modeEach press of the buttonpair progresses the printerthrough Quieter print mode> High multipart print mode> Normal print modeOff-line IneffectiveBUTTON STATUS FUNCTION