46 Microline 320/321 Turbo/n|Setting Top of Form, Forms Tear-Off OFF(Step B)! If you turn the platen knob when the printer is turnedon, you will cause the Top of Form to mis-align. Alwaysturn the printer off before turning the platen knob!! Always determine the status of the Forms Tear-Off menusetting BEFORE setting the Top of Form. Refer to“Using Your Printer, Top of Form, Forms Tear-OffStatus (ON or OFF).”1 Turn the printer ON.2 Press SEL/MENU (6) to take the printer off line. TheSEL light goes out.3 Press and hold SHIFT (1).Then, press LF / Micro Feed Down (2) or FF/LOAD /Micro Feed Up (3), depending on which direction youwant to move the paper to align the tear-off position.
