18 Microline 420/421 User’s GuideChanging the Forms Tear-Off SettingNote: The default setting for Forms Tear-Off is OFF.To change the Forms Tear-Off setting:1 Press SHIFT (2) + SEL (1).2 Press GROUP (3) repeatedly until the Rear Feed or BottomFeed group shows in the first column of the printed line,depending on which paper feed you are using,3 Press ITEM (4) repeatedly until Form Tear-Off appears in thesecond column:Rear Feed Form Tear-Off Off4 Press SET (5) until the time interval you wish to selectappears in the third column:Rear Feed Form Tear-Off 1 Sec5 Press SHIFT (2) + SEL (1) to exit Menu Mode and save thesetting.Manual Forms Tear OffIf you don’t wish to engage the Forms Tear-Off feature, youcan advance• rear-feed continuous forms loaded on the built-in tractoror• bottom-feed continuous forms loaded on the optional pushtractorup to the tear off position manually by pressing TEAR (5).Paper ParkImportant!Never park labels!Paper park allows you to switch to single-sheet printing withoutremoving continuous feed paper from the printer.When you wish to print single sheets, simply press PARK (6) toretract the continuous form paper from the paper path, then liftthe sheet guide, load the sheet and send the print job.
