Troubleshooting 61Problems / SolutionsProblemMy word processor files do not print the way I have the menuand front panel set.SolutionRemember:• Settings in your software application can override settings inyour printer driver.• Your printer driver settings can override any settings from theprinter menu or printer front panel.Before sending a file to the printer, many word processors sendeither an “initialization string” or an I-Prime signal to theprinter.The initialization string contains codes that override the paneland menu settings. To change your printer to ignore the resetcode, enter the Menu Mode, go to the Set-Up group and changethe setting for Reset Inhibit to Yes.The I-Prime signal will automatically override any front panelsettings you have made. To eliminate this problem, enter theMenu Mode, go to the Parallel Interface group and change thesetting for I Prime to Invalid.For more information on changing menu settings, see“Changing the Menu Settings” in Chapter 4.ProblemNothing happens when I turn on the printer.SolutionCheck the power cord connection to the outlet and to theprinter. If you are using a power strip, make sure it is turned on,and that the fuse hasn’t blown or that the circuit breaker hasn’ttripped.
