42114101 Rev.1 51 /REARBOTTOMTOP SW1SW2BOTTOMTOPREAR2.2.7 Automatic sheet feedThis function is used to feed in the sheet automatically up to the print start position when thecut sheet or the continuous sheet is used.[Operational procedure](1) When using the cut sheet1) Set the change lever to the TOP position. (See Figure 2-13.)2) Insert a sheet of paper between the platen and the paper shoot.3) After the lapse of time selected by the “wait time” in the menu, the LF motor startsits operation to feed the sheet of paper up to the print position.4) When the default is selected, the sheet of paper is feed in up to the position 0.85inches (first dot position) from the upper end of the sheet. However, the 0 tear offmechanism allows the printing at the front end of the sheet by changing the TOFposition.Figure 2-16 Time outTime selectedon the menuSheet settingPEDetection timerLF action
