Using your printer > 249. Adjust the left tractor until the holes in the paper are centered on the pins then lockthe lever and close the left tractor cover.10. Lower the sheet guide and slide it towards the front of the printer until the marksalign.11. Place the wire guide in the sheet guide on the pull-up roller assembly.12. Press FF/LOAD.NOTEIf the paper is too loose, or too tight, it can cause jams.NOTEThe factory default setting for the Top of Form (where the printing shouldbegin) is 1" down from the top of the page. To change the setting, see “Topof Form (TOF)” in the previous chapter.
