Oki ML5520 User Manual

Also see for ML5520: User guide

Using your printer > 40P RINTER RESETClearing some error conditions requires that you reset (reinitialise) the printer. To do this:1. Press and release SEL (1) to take the printer off line.The SEL light goes out.2. Press and hold SHIFT (2), then press the RESET/CHARACTER PITCH key (5).CHANGING EMULATIONSMake sure paper is loaded.1. Press and hold SHIFT (2), then press SEL (1).2. Press LF(3).The following line will print:3. Press TEAR (4) repeatedly until the emulation you wish to select prints in theright-hand column.4. Press and hold SHIFT (2), then press SEL (1) to save your setting and exit the MenuMode.NOTEPressing SHIFT and RESET reinitialises the printer, but does not affect anymenu settings and does not reset the printer to the factory defaults. Forinformation on resetting the printer to the factory defaults, see “Resetting themenu to the factory defaults” on page 41.Printer Control Emulation Mode IBM PPR (ML5520ECO/ML5521ECO)EPSON LQ (ML5590ECO/ML5591ECO)1 2 3 45