Oki ML690 User Manual

Also see for ML690: Installation Specifications Installation instructions Installation instructions Guía del usuario

Contents

Oki ML690 User Manual Manual pdf 23 page image

ML690/ML691 User’s Guide TEAR and LF/FF keys at the same time, thenrelease the keys.Continue until the tear-off perforations have beenaligned with the paper cutter.When data is received by the printer or when the SELkey is pressed to select the printer, the paper willretract to the new position.Removing Continuous Forms PaperTear off the continuous forms.Press the LOAD/EJECT key to move the front edgeof the continuous forms backwards to the PinTractors.NOTE:The printer switches to offline mode. TheALARM indicator illuminates to indicate thatthere is no paper present. If sprocket holesof the last page of the forms disengage fromthe sprocket pins, do not attempt to eject thepaper to avoid the possibility of a paper jam.Lift the pin tractor covers and remove the forms.Close the pin tractor covers..1....Loading Cut Sheet PaperThere are two methods of loading single sheets ofcut sheet paper, top feed and front feed. See thefollowing pages for instruction.Cut Sheet Paper, Top and Front FeedMake sure the printer is turned ON.Note: If there is any continuous forms paper in theprinter, eject it as described in “RemovingContinuous Forms Paper”.Make sure that the Pin Tractor covers are closed toavoid the possibility of paper jams.Place the Paper Type lever in the cut sheet position:To load the cut sheet in the Top Feed Paper tray,raise the top tray.To load the cut sheet in the Front Feed Paper tray,open the front cover and install the front paper tray.1....