ML690/ML691 User’s Guide Setting Top of Form (TOF):Notes:Adjusting the TOF can be done in cut sheet orcontinuous forms mode.If necessary, print the menu settings todetermine where the current TOF is set.The default TOF is set at 11/12” (23.28 mm).With paper loaded and the printer on and selected:Align the paper with the first print line position asfollows:To set the TOF lower (the first line of print onthe page moves down), press and hold downthe LOAD/EJECT and SEL keys at the sametime.To set the TOF higher (the first line of print onthe page moves up), press and hold down theLOAD/EJECT and LF/FF keys at the same time.The paper moves in increments of 1/180”.When you have the TOF set where you want it,press and hold SEL, then press LF/FF to save thenew setting.Note: To reset the Top of Form to the factory default,see “Resetting Top of Form to the FactoryDefault” later in this chapter.1..
