MPS6500b User’s Guide> 106Net: Error Used for display of Network Interface error code (Net1:Error yy)NVRAM Failure NVRAM failure message.Offset Tray Optional face-down output tray (offset-capable)Offset Tray Fail Error message displayed for Offset Tray Unit Failure.Offset Tray Full Error message displayed when optional output bin is fullOffset Tray Jam Paper jam detected. Error message displayed for OffsetTray JamOut of Memory Error displayed when there is insufficient memory to printa page or job.Output Tray Full Error message displayed when output tray is fullPanel Disabled Used when panel is being Disabled.Panel Enabled Used when panel is being Enabled.Panel Locked Message “flashed” when user requests panel function thathas been disabled.Paper Low Tray 1 Tray 1 is low on paper.Paper Low Tray 2 Tray 2 is low on paper.Paper Low Tray 3 Tray 3 is low on paper.Paper Low Tray 4 Tray 4 is low on paper.Paper Out Tray 1 Tray 1 has no paperPaper Out Tray 2 Tray 2 has no paperPaper Out Tray 3 Tray 3 has no paperPaper Out Tray 4 Tray 4 has no paperPaper Size Error Used to report Paper Size Error has occurred.Power Saver Mode Displayed when printer is “Warming Up”Press ONLINE Prompts the user to press the “ONLINE” buttonProcessing Printer is actively processing job data.Receive Status display for file status “Receive xx” (where xx ispercentage received).Remove Paper A help message to removed paperReplace EP Cart A help message to replace the EP Cartridge.ROS Failure Error message displayed for ROS failure.SELECT to Format User prompt displayed when unformatted disk detected.Message Condition/Reason/Action