Page: 311Service Manual for OF5300/5600Chapter F Second Paper FeederWhen the Second Paper Feeder is installed, the Second Paper Feeder is connected to the facsimile by aconnector. The Second Paper Feeder supplies paper automatically through the operation of pulse motor(hopping), which is driven by signals sent from CPU of the Second Paper Feeder under the control of thefacsimile.The main functions are listed below.Paper that can be used:Paper TypeStandard paper: Xerox 4200 (20-lb)Special paper: PPC sheets; use of envelopes or thick paper is not possibleCut sheet size: A4, Letter, Legal13, Legal14Special size: Paper width: 210 to 216 mm (82.7 to 8.5 inches)Paper length: 279.4 to 355.6 mm (11 to 14 inches)Weight16-lb to 24-lb (60 to 90 g/m2)Paper setting quantity: 500 sheets of paper weighing 17.07 lb. (64 g/m2)Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA BusinessPartner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
