Basic Operations 45Englishmachine will automatically print out anyreceived in memory when the paper is.r Receptionur fax machine is running low on toner, it willTONER LOW, REPLACE TONER message,receive faxes into memory if it is programmed(rather than risk printing an unreadable. If your fax machine has received a messagery because toner is low, MSG. IN MEMORYar on the display.out a message stored in memory when tonerg low, follow the instructions below.Select Function key.10/Message Print From Memory One Touchdisplay will show 1:SUBST. MESSAGE PRINT.Yes F key. The stored message will beginif you see a TONER LOW message on your fax, you may be able to use the 10/Message Printmory One Touch key to continue printingt the print quality cannot be guaranteed.our toner cartridge as soon as possible.Cancelling Messages Stored in MemoryIt is also possible to erase messages received inmemory without printing them.1 After you have followed the instructions to print outmessages stored in memory, the display will showMSG. IN MEMORY, PRINTING.2 To erase the message instead of printing it, press theStop key. The display will show CANCEL?3 Press the Yes F key to erase the message from your faxmachine’s memory.Rejecting Unsolicited Fax MessagesThe closed network option allows you to limit thelocations your fax machine can communicate with.Using this function, you can set your fax machine torefuse to receive any incoming faxes from locationswhose telephone numbers are not programmed intoyour One Touch keys or Auto Dial numbers. In thisway, your fax machine will automatically rejectunsolicited fax messages such as advertising. You canalso set your fax machine to neither send faxes to norreceive faxes from locations whose telephone numbersare not programmed into your One Touch keys orAuto Dial numbers. The available settings are limitreception only (RX), limit both transmission and