Oki OKIFAX 2350 User Manual

Also see for OKIFAX 1050: Assembly guide User guide Service manual

Contents

Oki OKIFAX 2350 User Manual Manual pdf 51 page image

Advanced Operations 51Englishly want to transmit to one location, press theto confirm your selection into memory (youave to perform Steps 13–15).nt to transmit to multiple locations, press they to confirm your selection.teps 10 and 11 as often as necessary toselecting locations. You can add a maximume Touch and Auto Dial locations available plusbers using the numeric keypad.u are finished selecting locations, press they at the SELECT LOCATION(S) message.ve selected multiple locations, your faxwill ask if you want to confirm your selectionsinted report before proceeding. Press they. After the report is printed, the display willANNING START? If you want to makens, press the No E key and go back to Stepmove a location, select the location in they, but press the No E key in Step 11 to deleteour transmission.sing the numeric keypad, pressthe # key, then enter the numberof the group you want to use.r dialed onric keypad Dial as you would on a normaltelephone.t Using Do This 15 When all of your selections are correct, press the Startkey. Your fax machine will scan the documents intomemory and begin waiting until the time and date youhave set before sending the fax. When scanning iscompleted, your fax machine will be available forother transmission operations.Cancelling a Delayed TransmissionTo cancel a delayed transmission from the documentfeeder or from memory before it has been sent, followthe instructions below.1 Press the Stop key. The display will showCOMMUNICATION CANCEL.2 Press the Yes F key. The display will show theLocation ID of the first delayed transmission currentlyloaded in your fax machine.3 If the displayed transmission is the one you want tocancel, press the Yes F key. If the displayedtransmission is not the one you want to cancel, pressthe No E key repeatedly until the transmission youwant to cancel is displayed. Press the Yes F key tocancel it.4 If the delayed transmission was a feeder transmission,press the Stop key again to remove the document fromthe document feeder.