|User’s Guide: English 125Relay Initiating StationYour machine can act as the relay initiating station, whichstarts the relay broadcast by sending the original documents.Before you program your machine to initiate a relaybroadcast, you must have the information listed below.∑ Relay Password∑ Relay Group Numbers∑ Relay Key Station (Hub) number∑ Relay Report Number (Contact number for RelayBroadcast Report)Get the relay password, the relay group numbers, and therelay key station (hub) number from the relay key station(hub) operator.The Relay Report Number (contact number for the relaybroadcast report) is the number of the relay initiating station,programmed to a special location and in the format used bythe relay key station (hub).This means that you must program your fax machine’stelephone number into Auto Dial 150.Your machine is the relay initiating station.Your machine’s telephone number is the Relay ReportNumber (contact number for the Relay Broadcast Report).Auto Dial 150 (on your machine) is the special location.! Be sure to program the Relay Report Number (contactnumber for the Relay Broadcast Report) in the formatthe relay key station (hub) uses for dialing.For example, be sure to include the access digit, ifrequired.
