Service Guide OKIFAX 5750/5950Chapter 2 InstallationPage: 107Service Personnel Initial Settings Table 2.9.2.3 (8/11)T.F.No.Item Specifications26 LED heat strobe Set the LED head strobe time. The larger the value, the darkerthe image.1) Setting values00000 to 11111 (5 bits)Note1: When the rank marking of the new replaced LED printhead (new part) is same as that of the old used LED print head(old part), you do not always have to set the LED print headstrobe signal.Note2: Intensity ranking is determined by the first, second andthird digits from the right on the LED print head serial number.(i.e. in ...061, 061 is the intensity ranking.)Note3: Setting values are not initialized even though All DataClear is performed.Setting of Technical Function No. 26
