Service Guide OKIFAX 5750/5950Chapter 1 General InformationPage: 17Table 1.5.1 (7/8) Basic Performance SpecificationsNo. Item Specifications29 Transmission time 2.5 seconds at 33.6 kbps with JBIG for OKIFAX 5950 and 3.0seconds at 33.6 kbps for OKIFAX 5750 per sheet of ITU-T No.1 evaluation test chart.Note: This speed denotes the time interval corresponding toPhase C (message transmission phase) as referred to in ITU-TT.30.OKIFAX 5750 OKIFAX 5750 OKIFAX 5950 OKIFAX 5950Procedure Time InitialIntermediateFinal8.5 sec. (V34)1.0 sec. (V34)1.0 sec. (V34)InitialIntermediateFinal8.5 sec. (V34)1.0 sec. (V34)1.0 sec. (V34)G3BasicImage Time 33600 Standard 3.0 sec.Fine 4.2 sec.33600 Standard 2.5 sec.Fine 3.5 sec.Note: The following table shows the values under the following conditions:Sender ID: OFFlHigh-speed protocol: OFFlTransmission mode: MemorylResolution: STDlNo. Item Specifications30 Error correction ITU-T ECM defined in T4, T.30 are provided.31 Communication mode Half-duplex32 Ringing signal detectionsensitivity1) Voltage range 25 to 150 V r.m.s.Inoperative below 10 VNote: This range may differ by the requirement of PTT.2) Frequency range 20 to 68 HzNote: This range may differ by the requirement of PTT.
