| OKIFAX 5780/5980198Message Confirmation Report OptionsMessage Confirmation Report (MCF) is a very convenientfeature that is often used on a daily basis to ensure that faxeswere sent or arrived at the proper destinations. Use thefollowing functions to set MCF parameters.MCF (Single-Loc)Speed Access no. 70Set to ON, an MCF automatically prints for single locationtransmissions.Set to OFF, no report prints.The default setting is OFF.MCF (Multi-Loc)Speed Access no. 71Set to ON, single and multiple location transmission MCFsautomatically print.Set to OFF, no report prints.The default setting is ON.Image in MCFSpeed Access no. 72Set to ON, the entire first page of the fax transmitted prints inthe MCF.Set to OFF, no image prints in the report.The default setting is ON.Err. Report (MCF)Speed Access no. 73Set to ON, an error report automatically prints if a faxcommunication is not successful.Set to OFF, the report does not automatically print.The default setting is ON.! The Service Code 0000 on an MCF Report means thatthe fax communication was successful.
