IV - 55Section 4 - Appendix B - Application ConsiderationsOKI OkiLAN 6100e+ User’s GuideTCP/IPAppendix BApplication ConsiderationsOverviewThis appendix provides application notes for thefollowing:• Assigning the OkiLAN 6100e+ IP Address withBOOTP• Assigning the OkiLAN 6100e+ IP Address withRARP• Using the Windows NT v3.5 LPR Print Monitor• Configuring HP-UX v8.07 for Printing• Configuring HP-UX v9.xx for Printing• Configuring HP-UX v10.xx for Printing• Configuring SCO UNIX for Printing• Configuring IBM’s AIX ver. 3.x for Printing• Configuring the OkiLAN 6100e+ for SolarisPrinting• Configuring Sun-OS v4.1.x or Ultrix v4.2 forPrintingAssigning the OkiLAN 6100e+ IPAddress with BOOTPBOOTP is an acronym forBOOTStrapProtocol.Every TCP/IP network device is required to have aunique 32-bit IP address assigned to it. TCP/IP networkdevices will have both an IP address and a 48 bitEthernet/Token-Ring (network hardware) address.Ethernet addresses usually cannot be configured andare hard coded by the manufacturer of the device.BOOTP is a protocol used by devices that know theirnetwork hardware address, but do not know their IPaddress. When powering up on a network, a device thatuses BOOTP will broadcast its network hardwareaddress in a BOOT request packet. A BOOTP server
