II - 9Section 2 - Chapter 4 - HP Web JetAdmin SupportOKI OkiLAN 6100e+ User’s GuideAdvanced ManagementChapter 4HP Web JetAdmin SupportOverviewThis section contains instructions and information onhow to configure, install, and obtain diagnosticinformation from your OkiLAN 6100e+ using theHewlett-Packard Web JetAdmin software.Software Requirements• Web JetAdmin 1.x, 2.x, 3.x, or 4.xNote: For more information on installing and usingHP Web JetAdmin, refer to the HP WebJetAdmin documentation.Configuring the OkiLAN 6100e+Using Web JetAdmin1. From the main Web JetAdmin page, select theOkiLAN 6100e+ port you wish to configure.2. On the Properties page, click the Config button.3. Make any necessary changes to the options listedand click the corresponding Apply button.Installing a Windows NT Printer forthe OkiLAN 6100e+1. From the main Web JetAdmin page, select theOkiLAN 6100e+ port you wish to install.2. On the Properties page, click the Install Printerbutton.3. In the Specify the device address… field, enter theprint server IP address, followed by a comma andthen the output port number. For example, to install aprinter for output port 2 of an OkiLAN 6100e+ withan IP address of 10.10.10.2, enter “10.10.10.2,2”.
