II - 7Section 2 - Chapter 3 - HP JetAdmin SupportOKI OkiLAN 6100e+ User’s GuideAdvanced ManagementChapter 3HP JetAdmin SupportOverviewThis section contains instructions and information onhow to configure and obtain diagnostic informationfrom your OkiLAN 6100e+ using the Hewlett-PackardJetAdmin software.Software Requirements• JetAdmin 2.4, 2.5, or 3.02• Windows 95/98 or Windows NT/2000Note: For more information on installing and usingHP JetAdmin, refer to the HP JetAdmindocumentation.Configuring the OkiLAN 6100e+Using JetAdminNetWare Configuration1. From the main JetAdmin screen, select the OkiLAN6100e+ port you wish to configure.2. Select Modify from the Device menu.3. On the Configuration screen, select the General taband enter the print server name and description.4. Select the NetWare tab and click on the OperatingMode icon from the left column. Set the print serveroperating mode from the given options on the right.5. If you are running a NetWare 4.x network, click theNetWare Directory Services icon from the leftcolumn. Select NDS Tree Name from the pull-downmenu and enter the Print Server Context.6. Click the Queues icon from the left column to bringup the Queues screen and then click the Changebutton.
