Oki OKIPAGE 14ex Maintenance Manual

Also see for OKIPAGE 14ex: Setup guide Manual Setup guide Brochure & specs Technical reference

Contents

Oki OKIPAGE 14ex Maintenance Manual Manual pdf 168 page image

41356901TH Rev.2 168 /3.3.6 Roller-A and BWhile only the removal procedure for roller-A is described here, the removal procedure for roller-B isbasically same. When removing roller-B, however, be careful not to deform the sensor plate.(1) Remove the upper frame [ see 3.3.2 steps (1) through (3) ].(2) Remove the separator assembly (see 3.3.2).(3) Remove the OLEV-11-PCB (see 3.3.3).(4) Remove the motor bracket (see 3.3.5).(5) Remove the gear 1.(6) Shift the roller-A 2 to the right, lift it on its left side and slide it out (the bearing 3 also comes off whileyou are doing this, so be careful not to lose it).Roller-BSensor Plate321