Oki OKIPAGE 14ex Maintenance Manual

Also see for OKIPAGE 14ex: Setup guide Manual Setup guide Brochure & specs Technical reference

Contents

Oki OKIPAGE 14ex Maintenance Manual Manual pdf 18 page image

41356901TH Rev.2 18 /2.1 Main Control BoardThe main control board consists of a single chip CPU, two program/font ROMs, four DRAMs, anEEPROM, a host interface circuit, and a mechanism driving circuit.(1) Single chip CPUThe single chip CPU is a custom CPU (32-bit internal bus, 32-bit external bus, 49.766-MHz clock)which incorporates the RISC CPU and its peripheral devices, and has the following functions:(2) Program and Font ROMsThe Program and Font ROMs store the equipment program and various types of fonts. Mask ROMis used as Program and Font ROMs. The mounting locations of these Program and Font ROMs varydepending on the type of the ROMs.(3) DRAMThe DRAM is a 4MB resident memory on the main control board that stores edited data, image data,DLL data and macro data.(4) EEPROM4,096-bit Electrically Erasable PROM (EEPROM), is loaded with the following kinds of data:• Menu data• Various counter data (page counter, drum counter)• Adjusting parameters (LED head drive time, print start position, paper feed length)(5) Parallel InterfaceParallel data is received from a host system via parallel interface which conforms to the IEEE1284specification.(6) USB InterfaceSerial data is received from a host system via USB which conforms to the USB 1.1 specification.Built-in device FunctionChip select controllerBus controllerDRAM controllerDMA controllerParallel interface controllerSerial interface controllerVideo output portLED STB output portTimerSerial I/O portI/O portControl of ROM, DRAM and I/O deviceTransfer of image data from DRAM to video output portControl of Centronics parallel interfaceControl of RS-232C serial interfaceControl of LED headGeneration of various control timingMonitoring of paper running and paper sizeControl of operator panel, EEPROM, and optionsInput and output of sensor and motor signals