Service Manual for OKIPAGE 8zChapter 4 AdjustmentPage: 444.0 AdjustmentThis chapter explains adjustment necessary when a part is replaced.This adjustment is made by changing the parameters values set in EEPROM on the main control board. The printerdriver or maintenance utility can be used to change these values.Only servicemen and maintenance personnel can use the maintenance utility. This utility cannot be made public forprinter end users.4.1 Adjustment Types and Functions4.2 Adjustment When Replacing a PartCopyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange(BPX) for any updates to this material. (http://bpx.okidata.com)
