40931201TH Rev. 4 102 /Table 4-1 EEPROM Initial Setting RangeEvent(Note 2) (Note 2)No123456Menu Level 1Menu level 2F/W Revision RangeDestinationInformationUsersMaintenanceRange (noe1)SystemsMaintenanceRange (note1)EngineMaintenanceRange (note1)Drum CounterFuser CounterUsers MaintenanceMenu ResetSystems MaintenanceEEPROM ResetEngine MaintenanceEngine ResetFirm Revision CheckError Power OnSetting for ShippingDestinationUsers InformationErrorNote 1 : The items for each maintenance menu of the events are to be listed.Note 2 : Will be reset to 0 only when the page counter is 500 or less.Engine ID check error at power on is set at default for all menu items, thus it will not be mentioned here.Page CounterHSPTable 4-2 Items Related to Each Maintenance Menu of EEPROM ResetUsers MaintenanceMenu RangeResource SaveReceive BufferEnable/ Disable ofOperator PanelMenu FunctionX/ Y/ DUP ADJUSTPaper Feed Command of2nd/ 3rd/ Front TraysPrint Shift to Left BasedCleaning CycleSystems MaintenanceMenu RangeEnable/ Disable of TotalNumber of Menu PrintEnable/ Disable ofSwitching SIDM EmulationNBC (F/W Rev.02.21~)No items subjected to.All except counters are subjectedto reset.As a common spec, we apply thisto each model at NBC.(F/W Rev.02.21)PSU (F/W Rev.01.07)Correction head type (excluding the timeupon engine maintenance engine reset)LED head drive time (excluding the timeupon engine maintenance engine reset)600 x 1200dpi strobe time relative value(excluding the time upon enginemaintenance engine reset)Print start positionPaper feed distance from each trayPaper feed distance from the Duplex UnitControl parameter of each option traymotorEngine testEngine Maintenance Menu Range4.1.4 EEPROM initializationThe corresponding area of the EEPROM is initialized for each event as shown Table 4-1 and Table4-2.
