Oki OKIPAGE18 Maintenance Manual

Also see for OKIPAGE18: User guide Installation and setup Instructions User guide User guide

Contents

Oki OKIPAGE18 Maintenance Manual Manual pdf 62 page image

40931201TH Rev. 4 62 /3.3.6 Stacker Assy, Damper Arm, Cover Rear(1) Remove the face-up stacker assy. [See 3.3.1](2) Remove the cover-side (L). [See 3.3.2 (1)](3) Remove the OP panel assy. [See 3.3.4](4) Remove the Board-FFH. [See 3.3.5](5) Loosen 2 screws, unlock the both sides latches and remove the cover rear A.(6) Unscrew 2 screws 1 and cover frame 2.(7) Unscrew 4 screws 3 and remove the plate assy-side (R) 4.(8) Remove the lever back up release 5 and unlock the engagement of the projection on theright side of gear at the right side of stacker cover.(9) Remove a screw 6 and washer 7, and then remove the stacker assy 8.(At this time, the damper arm 9 can also be detached simultaneously.)8A9025714336