40930701TH DRAFT Vesion 233 /4.3.1 LCD Status Message ListThe listing of the statuses and problems displayed in the form of messages on the LCD is providedin Table 4-1.Table 4-1PAPER INPUT JAMCHECK FEEDERPAPER FEED JAMCHECK FEEDERERROR PAPER SIZECHECK FEEDERERROR81Classification LCD Status Message Description Recovery methodJam errorPaper size errorTray paper outInterface TimeoutNotifies of occurrence ofjam while the paper is beingfed from the Multi Feeder.Notifies of incorrect size pa-per feeding from the MultiFeeder.Notifies of no paper state ofthe Multi Feeder.Notifies of occurrence ofinterface timeout betweenthe printer and the MultiFeeder.• Check the paper in the Multi Feeder.Carry out the recovery printing byopening the cover, removing jammedpaper and closing the cover, and thenturning the error display off.• When the problem occurs frequently,to through the Troubleshooting.• Check the paper in the Multi Feeder.Also check to see if there was a feed-ing of multiple sheets.Carry out the recovery printing byopening the cover, removing paperand closing the cover, and then turn-ing the error display off.• Load the paper in the Multi Feeder.• Verify connection of AOLE-PCB andsquare-shaped connector.Replace the square-shaped connec-tor if necessary.• Replace AOLE-PCB.PAPER OUTmmmmmmmm FEEDERmmmmmmmm :Paper size in the traybeing selected
