Oki Okilan 7100e+ User Manual

Also see for OF5780: Options guide User guide

Oki Okilan 7100e+ User Manual Manual pdf 18 page image

18 Network print server|NDSTree Name–In print server mode, enter the name of the treein which the file server is located. Maximum length: 31characters.Context–In print server mode, enter the name of the contextin which the Print Server was created. Maximum length:77 characters. For example, LAB.OKI. Field is casesensitive!File Servers per Pserver ModeFile Server Name–Enter the name of the file servercontrolling the NETWORK PRINT SERVER in printserver mode. A maximum of eight file servers may bedesignated. Maximum length: 31 characters.Remote Printer ModePrinter Name for R-Printer Mode–Enter the printer namestored on the print server in remote printer mode. Makesure that this name is identical to the “Printer Name”stored on the print server. Maximum length: 31 characters.Job Timeout–This is the time from receiving the last printpacket to releasing the NETWORK PRINT SERVER portat the end of the print job, in remote printer mode. If theset value is too low, any packet delay may stop printingpart way through. The default value should normally beused. The setting may be between 4 - 255 seconds.Print Server Name–Enter the print server name controllingthe network print server in remote printer mode. Amaximum of eight print servers may be designated.Maximum length: 31 characters.NetBEUI SettingsComputer Name–Enter the name of the computer. Maximumlength: 15 characters.Workgroup Name–Enter the name of the workgroup.Maximum length: 15 characters.Comment–Enter user information relating to the computer.Maximum length: 48 characters.EtherTalk SettingsNote: EtherTalk settings are not supported by the faxmachine.EtherTalk Zone Name–Enter the new zone name if youchange the zone to which your printer belongs.EtherTalk Printer Name–Enter the new printer name if youchange the printer name used by Chooser. Maximumlength: 31 characters.