EnglishUser’s Guide7Printer menusIt is possible, using the front panel buttons, to changethe default configuration of the printer to accommodatesoftware application, specific paper size, method of pa-per feed and interface connection. The menu structureconsists of three levels:CategoryEach category consists of several items, selected bypressing the MENU 1/Menu 2 button (with the printeroff-line). When the required category is displayed,press the ENTER button to display a list of items.ItemEach item consists of several parameters displayed onthe upper line in the LCD by pressing the MENU 1/Menu 2 button.ParameterThe parameter will be displayed on the lower line of theLCD by pressing the WWWW/Recover and XXXX/Reset buttons.When the required parameter is displayed, press theENTER button.Viewing and modifying menu settingsNote: If software can control a feature that is alsocontrolled in the printer menu, the softwareoverrides the menu setting. Use software tocontrol printer features whenever possible.1. Press ON LINE to place the printer off-line toenter Menu 1 or Menu 2 as required.2. Menu 1 is selected by momentarily pressing andreleasing the MENU 1/Menu 2 button. Menu 2 isselected by holding down the MENU 1/Menu 2button for at least two seconds.3. Once the first menu category is displayed, furtherpresses of the MENU 1/Menu 2 button move onto the next category.4. To enter a category and display an item, press theENTER button. The LCD shows the item in thetop line and the current parameter in the bottomline.