40496501TH Draft Version 633.3.10 Tractor Change Motor Assy(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)(2) Remove Printer Unit. (See 3.3.2)(3) Remove I/F Board. (See 3.3.6)(4) Release the cords from Cord Clamp 3 on the cord route.(5) Unscrew 2 screws 4 and remove Cable Holder 5.(6) Unscrew the screw 6 and cut the wrapping tie 7.(7) Remove Micro Switch 8.(8) Unscrew 2 screws 9 and remove Tractor Change Motor Assy 0.(9) Remove E rings A and the gear B.(10) Unscrew 2 screws C and remove Motor D.(11) For installation, reverse the removal procedure.B0BDC68799445AView AView A