40496501TH Draft Version 643.3.11 Bail Motor Assy(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)(2) Unplug the connectors 1 from I/F Board (PHA Printed Board)(CN2) B.(3) Unplug the connectors A from I/F Board (PHA Printed Board)(CN11) B.(4) Release the cords from the cord clamps on the cord route.(5) Unscrew the screw 2 and cut the wrapping tie.(6) Remove Micro Switch 3.(7) Unscrew 2 screws 4 and remove Bail Motor Assy 5.(8) Unscrew 2 screws 6 and remove the motor 7.(9) Remove E rings 8 and 2 gears 9 and 0.(10) For installation, reverse the removal procedure.6098237451BAWrapping tie