Oki Pro8432WT User Manual

Also see for Pro8432WT: User manual

Contents

- 11 -1 1. Convenient Print FunctionsFor Windows PS Printer Driver1 From the [File] menu, select [Print].2 Click [Preferences] or [Properties].3 Select [Paper/Quality] tab.4 Select [Multi-Purpose Tray] from[Paper Source].5 Click [Advanced].6 Click [Paper Size] and then select [A4]or [Letter] from the drop-down list.7 Click [OK].8 Configure other settings if necessary andthen start printing.For OS X PS Printer Driver1 From the [File] menu, select [PageSetup].2 Select [A4] or [Letter] from [PaperSize].3 Select [Print] from [File] menu.4 Select [Paper Feed] from the panelmenu.5 Select [All pages From] and then select[Multi-Purpose Tray].6 Configure other settings if necessary andthen start printing.Memo● If setting details are not displayed in the print dialogbox for OS X, click [Show Details] at the bottom ofthe dialog box.Printing on Custom Size PaperYou can register a customized paper size on theprinter driver so you can print on nonstandardpaper.● Settable custom size rangeWidth: 64 to 297 mmLength: 90 to 431 mmPaper sizes that can be fed differ depending onthe tray.Note● Register the paper size as portrait, and load paper inportrait orientation.● This function may not be available in some applications.● If paper is so long that it exceeds the paper supports ofthe MP tray, support it by hand.● When using tray 1, press the scroll button or on theoperator panel > [Menus] > [Tray Configuration] >[Tray1 Config] > [Paper Size] > [Custom] beforedoing the following procedure.● If images are not correctly printed on large size paper,selecting [Standard (600x600dpi)] for [Print Quality],image in the PS printer driver may allow for correctprinting.● Use of paper with a width of less than 100 mm is notrecommended. Doing so may cause paper jams.Reference● For details on the paper sizes that can be fed on eachtray, refer to the User’s Manual (Setup).● The [Auto Tray Switch] is enabled by default. Whenthe tray runs out of paper during printing, the printerautomatically begins feeding paper from that tray. If youwant to feed custom paper only from a particular tray,disable auto tray switching. For auto tray change, refer to"Auto Tray Switching" P.21. Specifying Custom SizesTo load custom size paper, you need to registerthe width and length of the paper beforeprinting. The range of the sizes you can setdiffers according to the paper tray.Tray Available size rangeTray1 Width:105 to 297 mm (4.1 to 11.7 inches)Length:148, 182 to 431 mm (5.8 to 17.0 inches)MP tray Width:64 to 297 mm (2.5 to 11.7 inches)Length:90 to 431 mm (3.5 to 17.0 inches)Note● You can configure the [Custom] setting only when[Paper Size] is set to [Custom].