- 72 -Other Operations5 5. Network Settings Other OperationsThis section explains how to initialize the network settings and how to set up your printer and computerto use DHCP.Initializing Network SettingsNote● This procedure initializes all the network settings.1 Press the <ENTER> button.2 Press to select [Admin Setup] andthen press the <ENTER> button.3 Enter the administrator password usingthe numeric keypad.The factory default administrator password is“999999”.4 Press the <ENTER> button.5 Make sure that [Network Setup] isselected and then press the <ENTER>button.6 Press to select [Network FactoryDefaults] and then press the <ENTER>button.7 Make sure that [Execute] is selectedand then press the <ENTER> button.The network settings are initialized.