![Oki Pro8432WT User Manual Manual pdf 41 page image](https://manuals-archive2.s3.amazonaws.com/5402259/8fa70b749a28bbde4ef2074a4a0057ca41f.jpg)
- 41 -Changing the Equipment Settings3 3. Changing Printer SettingsItem Settings ExplanationNetwork Setup(cont.)Gigabit Network EnableDisableSets whether to support a gigabit network.When it is disabled, 1000Base-T Full/Halfduplex connection cannot be made.Hub Link Setting Auto Negotiate100Base-TX Full100Base-TX Half10Base-T Full10Base-T HalfSets a method to link to a HUB. WhenAuto is set, a connection method to a HUBis selected automatically and attempts toconnect.If another method is selected, attemptsto connect to a HUB only by the selectedconnection method.Network FactoryDefaultsExecute Specifies whether to initialize the networkfactory default settings for the Network.USB Setup USB Enable/Disable Enables/Disables the USB port.Speed 480Mbps/12Mbps Selects the interface speed. After settingchange the menu, the printer restarts on exit.Soft Reset Enable/Disable Enables/Disables the Soft Reset command.Serial Number Enable/Disable Specifies whether to ENABLE or DISABLE aUSB serial number.The USB serial number is used to identifythe USB device connected to your PC.Offline Receive Enable/Disable Offline receive.USB Memory Interface Enable/Disable Sets enable/disable of USB memory I/F.Connected Host NormalSpecificIf the printer is connected to a specific hostby USB, set it to [Specific] to print fromthis specific host.Print Setup Personality AutoPostScriptPCLSelects a printer language.Copies 1-999 Selects the number of copies.This setting is disabled for Local Print exceptfor Demo Page.Media Check EnableDisableSets whether the printer checks thematching of printed data size and that of thetray. Only standard sizes are checked.A4/Letter Override No/Yes When the A4 size is specified in the driverbut there is no tray set for A4 in the printer,the printing will be done from the tray withLetter paper loaded without a paper request.When the Letter size is specified in thedriver but there is no tray set for Letter inthe printer, the printing will be done fromthe tray with A4 paper loaded without apaper request.* There is no switching from the printerdriver.Resolution 600dpi600x1200dpi600dpi multi-levelSets default resolution.